Ir Remote Preparation - Dual XDVDN8190 Installation & Owner's Manual

To first use the IR Remote control,
you must first pull the battery
insulation tape out
To insert or replace the battery:
Remove the battery holder
Remove the battery from the battery
Install the new battery
Make sure to keep the (+) side up
Insert the battery holder
holder
XDVDN8190 OPERATION

IR Remote Preparation

Notes:
• Remove the battery if the remote will
not be used for a month or longer
• Remove and dispose of battery properly
• Do not store battery with metallic
objects or materials
CAUTION!!!
8