Am/Fm Tuner Operation; Am/Fm Tuner Mode; Band; Seek Tuning - Dual XDVDN8190 Installation & Owner's Manual

XDVDN8190

AM/FM Tuner Operation

AM/FM Tuner Mode

Manual Tuning

Seek Tuning

Storing Presets
Auto Store Presets
Preset Scan
31
OPERATION
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press MODE until TUNER is displayed on the screen.

Band

Touch on the screen repeatedly until the desired band is displayed, FM-1,
FM-2, FM-3, or AM.
Press the BAND button to switch between bands, FM-1, FM-2, FM-3, AM.
From the remote control:
Press the BAND button.
Touch on the screen to tune to the next higher frequency step.
Touch on the screen to tune to the next lower frequency step.
Touch and hold either
multiple stations.
From the remote control:
Touch or
Touch to tune to the next higher strong station.
Touch to tune to the next lower strong station.
From the remote control:
Press to tune to the next higher strong station.
Press to tune to the next lower strong station.
There are 36 FM and 12 AM presets available in 4 bands.
After finding a frequency that you would like to store in memory, touch and hold
the screen on any of the frequencies in the preset station list until it turns yellow.
Touch and hold the
available into the presets in the current band.
Press and hold the AS/PS button for more than 2 seconds.
Touching the
band and play them for 10 seconds each.
Press the AS/PS button momentarily.
or on the screen to continue tuning across
to perform manual tuning.
icon to automatically program the 12 strongest stations
button will scan through all tunable presets in the current