Remote Preparation - Dual XDCPA9BT Installation & Owner's Manual

Notes:
• The remote control uses one 3 volt Lithium CR2025 battery.
• Remove the battery if the remote will not be used for a month or longer.
• Remove and dispose of battery properly.
• Do not store battery with metallic objects or materials.
Slide the remote into the steering wheel clip to
mount on the steering wheel for easy access
while driving.
Remote Control Preparation
3
XDCPA9BT
1 Remove battery insulation tape
prior to first use.
To install a new battery, remove the battery cover
2
and the old battery, then insert the new battery
making sure to keep the (+) side up.
Replace the battery cover to secure.
OPERATION
Steering Wheel Clip
8