Enter The Sim Pin And Change Apn Settings - Ten-Haaft Oyster Connect Operating Instructions Manual

3. COMMISSIONING OF THE MOBILE CONNEC
TIONS / LTE CONNECTION

3.4 Enter the SIM PIN and change APN settings

SIM cards are usually protected against unauthorised use by a four-digit PIN. In order to enable the Oyster®
Connect to use your SIM card, the PIN code of the card must be entered once.
- Connect your end device (computer / smartphone / tablet..) to the indoor unit via WLAN or LAN
(as described in chapter 3.3)
- Call the website http://oyster.connect (or the die IP http://192.168.240.1).
- Enter the four-digit PIN in the „PIN set" window and press the button
LTE Mode
- Now press the button to restart the LTE module with the changed setting.
10
Save PIN
next to that window.
3. COMMISSIONING OF THE MOBILE CONNEC
TIONS / LTE CONNECTION
In the lower left corner of the web page, you can follow the system's status feedback live.
- The Oyster® Connect will automatically try to find the correct APN settings for your mobile network operator
in a database.
APN stands for Access Point Name. The APN data informs the mobile device where to send its data. If the
data for your mobile network provider is incorrect or unavailable, no data traffic will be possible despite a suc-
cessful connection to the LTE network. The LTE / WLAN LED (LED 2) blinks continuously green to indicate this
process. In such a case, you have the option of correcting the APN data by hand or adding it in the corre-
sponding fields then save with .
Save APN
You receive the correct APN data for your SIM card from your mobile network operator.
- After the LTE connection has been successfully established, four green LEDs should light up continuously on
the front of the Indoor Unit:
Good signal Power ON
LTE Mode
SIM PIN OK
11