Ten-Haaft Oyster Connect Operating Instructions Manual page 11

5. OPTIONAL SETTINGS
SIM Card PIN Security
Serves to permanently switch off the PIN request of the SIM card (PIN security OFF) or to switch it on again
(PIN security ON).
First select the desired state from the selection menu and then enter the correct PIN of the SIM card in the
field below. Finally, press the "Save" button. The change will take effect the next time the system is restarted.
You can see the current status of the PIN query by pressing the "Info" button on the "Start Page".
Outdoor WLAN Options
Delete all Outdoor WLAN passwords
If you connect the Oyster® Connect to an external "Outdoor WLAN" that requires a password, the Oyster®
Connect will remember this password permanently.
Pressing the "Delete" button deletes all stored (outdoor) WLAN passwords.
This makes sense, for example, if your Oyster® Connect and the motorhome get a new owner and the new
owner is not supposed to acquire the password of your home WLAN at the same time.
System Options
Additional public DNS
"ON" or "OFF" (default setting). In the case of "ON", the Oyster® Connect additionally uses a public DNS
(information server for Internet pages).
If this public DNS is switched on, you may have problems accessing the login website of an open WLAN.
Therefore, the default setting is "OFF".
After the desired setting "ON" or "OFF" has been selected, the setting must be saved with the button "Set DNS".
Time Zone select
Here you can set the time zone so that the system time of the Oyster® Connect is correct. At present, however,
this setting has no further practical effect.
20
5. OPTIONAL SETTINGS
Change Login Password
The password "connect" is present for access to the password-protected area of this website.
The password can be changed by entering a new password of your choice twice and then pressing the "Chan-
ge" button.
System Shutdown
This button causes the Oyster® Connect to shut down. To switch the system back on, however, you must press
the button on the Indoor Unit again.
It is therefore not possible to switch the system back on via the website, as the website is logically not acces-
sible when the Oyster® Connect is in standby.
System Reboot
This button triggers an automatic reboot of the entire system Useful to solve any problems that may have
occurred.
Thermal Info
CPU temp (°C)
Displays the temperature of the processor core in degrees Celsius. Normally, this value settles in the range
between 40 and 65°C. At 103°C at the latest, the system switches itself off for self-protection.
CPU freq
Displays the clock frequency of the processor in megahertz. At very high temperatures, the clock frequency is
automatically reduced.
LTE temp (°C)
Displays the temperature inside the LTE module in the outdoor unit in degree Celsius. Values of up to 100° C
are quite tolerable here. In practice, however, 70° C is hardly reached even in blazing sun.
31
21