Reassembly
Press the Micro USB Cap into its cavity.
Make sure the pillar of the Micro USB Cap is above the
Main PBA as shown in the picture!
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
Snap the BtB connector with fingers.
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
5.2
Audio Jack FPC
Insert the Audio Jack FPC into the cavity of the Audio Jack
Cap.
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
Insert the power key into its cavity.
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
1265-6286 Rev 3
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
48(57)