Main O Ring - Sony XPERIA ST27i Working Instructions

Replacement

4.17 Main O Ring

Follow the 3.1 – 3.3 Disassembly instructions!
Carry out the Removal as described below.
Prepare the new Main O Ring.
Carry out the Installation as described below.
Follow the 5.4 – 5.6 Reassembly instructions!
REMOVAL
Lift up the Main O Ring by using a Flex Film Assembly Tool.
INSTALLATION
Place a new Main O Ring into the cavity according to
sequence 1-4 as shown in the picture.
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
Check all the hooks one by one around the Main O Ring to
make sure it is in the correct position.
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
1265-6286 Rev 3
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
35(57)