Main Camera & Camera Adhesive - Sony XPERIA ST27i Working Instructions

Reassembly
Snap the BtB connector with fingers.
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
Apply 12 ± 1 Ncm torque when tightening the Screw Other
Len:2.0 Diam:1.4 with Bits (JCIS No 0).
Take new screws!
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
5.3 Main Camera & Camera
adhesive
Place the Camera adhesive in the correct position.
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
Press to secure its attachment.
Do not touch the Main O Ring during operation!
Make sure the Main O Ring is not damaged, broken,
twisted or dusty before reassembly!
1265-6286 Rev 3
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
49(57)