Replacement
4.19 Micro USB Cap
Follow the 3.1 – 3.3 Disassembly instructions!
Carry out the Removal as described below.
Prepare the new Micro USB Cap.
Carry out the Installation as described below.
Follow the 5.4 – 5.6 Reassembly instructions!
REMOVAL
Open the Micro USB Cap.
Pull it out from the hole.
Note: If the pillar is broken inside phone, remove it!
INSTALLATION
Place the Micro USB Cap in the correct position.
1265-6286 Rev 3
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
39(57)