Use As A Repeater To Expand Existing Wifi Coverage - Rational iVario Original Installation Manual

4 | Installation
2. Select your chosen network. Confirm
the network with the Join network
display text.
3. Enter the WiFi password in the WPA
key input line [
the entry with the Submit display text.
4. Confirm the entry with the Save dis-
play text.
5. Confirm with the Save & Apply display
text.
>
The signal strength of the selected
WiFi is shown in the overview
[ Photo 18]. If the password is
entered incorrectly, 0% appears in
the overview. The process must be
repeated from Point 1. The settings
can be changed by pressing the
Edit display text.
6. Carry out a test. Open a web address
of your choice in your browser.
7. Connect the Ethernet cable to the Eth-
ernet interface on the unit.
8. Close the electrical compartment.
9. Activate DHCP in the network settings
of the unit.
10. Restart the unit.
>>
The unit is connected to the WiFi.
1. Activate the ConnectedCooking op-
tion in the unit settings.
>>
You will receive an activation code to
register the unit in ConnectedCooking.
Further information on Connected-
Cooking can be found in the Connec-
tedCooking manual.
80.51.915_iVario-iVarioPro-VCC_WiFi-Adapter_IM_EU-west
Photo 17]. Confirm
4.2.2 Use as a repeater to expand
existing WiFi coverage
NOTICE
Repeater mode requires permanent
power supply
To use the Repeater mode, the unit
must be switched on with the
connected WiFi adapter.
NOTICE
Number of units connected in
Repeater mode
Only a limited number of units can be
connected in Repeater mode with the
WiFi adapter:
For iVario or iVario Pro: max. 10
n
units
For VarioCookingCenter: max. 5
n
units
NOTICE
Number of units connected in
Repeater mode
Only a limited number of units can be
connected in Repeater mode with the
WiFi adapter:
For iVario or iVario Pro: max. 10
n
units
In this operating mode, the WiFi adapter is
used to expand the coverage of an existing
WiFi network. The WiFi adapter provides
its own wireless network in addition to the
existing network. This has a separate SSID,
a separate password and provides ad-
dresses from the address range
192.168.2.2 - 192.168.2.254 using its
own DHCP service.
en
17 / 120