Hover-1 INSTINCT H1-EGBR Operation Manual page 7

• Always check your Instinct for normal operation,
loose parts and defects before riding. If you nd any
problem, contact the customer support center for
repairs before riding.
• Be aware that other road users do not expect that
a pedal-assisted bicycle can ride faster than a
standard bicycle. Riding faster also increases the risk
of accidents.
• Do not ride aggressively. Refer to the "Operation
Conditions" section of this operation manual for
more detailed information.
• Make sure no straps are dangling where they could
get caught in the wheels - No bags, boxes or any
items are in a position where they could be caught in
the spokes.
• Check that your brakes are well adjusted.
• Check to see that your wheels are securely
fastened and that your helmet is securely fastened.
• Check to see if the frame and components are
cracked or broken. If at any time you notice a crack
or bend in your bike, stem, forks, or bars of your
Instinct, stop riding immediately and contact the
customer support center.
3. The electric system of your Instinct needs special
attention and care.
• Do not clean your Instinct with a high pressure
washer. High pressure water might enter through
connectors or other parts of the electric system and
could cause damage or cause the electric system
to stop working correctly.
Instead, clean your Instinct with a damp rag and
gently wipe the frame and other dirty areas, while
avoiding any parts of the electrical system. Any
3