Page 2
HELMETS SAVE LIVES! Always wear a properly tted helmet that complies with CPSC or CE safety standards when you ride your E-Bike. Correct Fitting: Make sure your helmet covers your forehead. Incorrect Fitting: Forehead is exposed and vulnerable to serious injury.
Page 3
• This manual includes all operating instructions and precautions, and users must read it carefully and follow the instructions. • Hover-1 can not be held liable for damage or injury caused by failure to understand and follow the warnings and instructions in this manual.
Page 4
LOW TEMPERATURE WARNING Low temperature will affect the lubrication of moving parts inside the My First E-Bike, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased. Use caution when riding the My First E-Bike in cold temperatures (below 40 degrees F).
Page 5
• Each child's My First E-Bike is equipped with a dedicated lithium battery and a dedicated smart charger. Please do not use other chargers to charge our product, and other types of electric vehicles should not be charged with our charger. The user shall be responsible.
PACKAGE CONTENTS • Hover-1 My First E-Bike • Wall Charger • Operation Manual SPECIFICATIONS Model: Hover-1™ My First E-Bike (H1-MFEB) Net Weight: 21 lbs (9.5 kg) Max Load: 132 lbs (60 kg) Max Speed: Up to 8 mph (15 km/h) Max Distance Range: Up to 7.5 miles (12 km)
Page 7
HOVER-1 MY FIRST E-BIKE DIAGRAM FEATURES/PARTS 1. Brake 7. Frame 2. Handle Bar 8. Kickstand 3. Steering Column 9. Foot Pegs 4. LED Display 10. Front Wheel 5. Seat 11. Front Fork 6. Rear Wheel 12. Charging Port...
PARTS LIST A. My First E-Bike Frame B. Handlebar Assembly C. Seat D. Wrench + Allen Key/Screw Driver Tool E. Wall Charger CONTROLS Power Button Brake Lever Speed Mode Throttle...
Page 9
ASSEMBLY UNPACKING STEPS 1. Insert the front wheel into the fork in the direction indicated by the arrow in Figure (a). Make sure the front wheel hooks into the front fork positioning hole. Then use an open-end wrench to tighten the nut. 2.
BEFORE RIDING It is important that you fully understand all elements of your My First E-Bike. If these elements are not used correctly, you will not have full control of your My First E-Bike. Before you ride, learn the functions of the various mechanisms on your E-Bike.
Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations. • For your safety, always wear a helmet that meets CPSC or CE safety standards.
Page 12
SAFETY CHECKLIST • Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your My First E-Bike. • Do not try to open or modify your My First E-Bike. Doing so, voids the manufacturer warranty and may cause your My First E-Bike to fail, resulting in injury or death.
Page 13
• Operate your My First E-Bike with extreme caution when indoors, especially around people, property, and narrow spaces. • Do not operate the My First E-Bike while talking, texting, or looking at your phone. • Do not ride your My First E-Bike where it is not permitted. •...
Page 14
WARNING: To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
Page 15
RIDING YOUR MY FIRST E-BIKE FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR MY FIRST E-BIKE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. Before using your My First E-Bike, be sure to familiarize yourself with the operating procedures.
Page 16
WARNING Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury. WEIGHT AND SPEED LIMITATIONS Speed and weight limits are set for your own safety. Please do not exceed the limits listed here in the manual.
Page 17
CHARGING YOUR MY FIRST E-BIKE CHARGING THE DEVICE • Ensure that the charging port is clean and dry. • Make sure that there is no dust, debris or dirt inside the port. • Plug the charger into a grounded wall outlet. The charging indicator light ON THE CHARGER indicates as a RED light if your My First E-Bike is not fully charged.
BATTERY CARE / MAINTENANCE BATTERY SPECIFICATIONS Battery Type: Rechargeable lithium-ion battery Charge Time: Up to 3 hours Voltage: 25.9 V Initial Capacity: 4 Ah BATTERY MAINTENANCE The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.
Page 19
• The battery contains dangerous substances, do not open the battery, or insert anything into the battery. • Only use the charger provided by Hover-1. • Do not attempt to charge the device if the battery has discharge or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.
CARE & MAINTENANCE CHECK • Every three months, please check the bicycle to see if any screws are loose. If they are loose, please tighten them. BATTERY • After purchasing My first e-bike, fully charge the battery before use. • After a long period of riding, charge it soon. If the battery is exhausted and not charged in time, it will seriously shorten the battery life and even cause the battery to fail.
Need help?
Do you have a question about the H1-MFEB and is the answer not in the manual?
Questions and answers