Copernicus Tech Tub TEC600C Assembly Manual page 7

You will need: (Not to Scale)
3
Assemble Power Strip on Divider
Bracket hooks fit
into recess.
4
Install Power Strip
Run power strip cable
out of the bottom
back hole.
3
1
Do not hook brackets
below second rail.
Version B - Released October 25, 2021 - Copernicus Educational Products Inc.
Divider
x1
2
Use the 7th slot
when positioning
your power strip.
Make sure snaps (x4)
are fully connected.
Make sure
divider tab
is pushed
down fully.
Pull power strip cable out of the
®
Tech Tub completely. This will
make the installation of the power
strip easier!