Using The Remote Control For Off-Air Tv Programming - Dish Network HM-DSR100RU User Manual

U
SING THE
P
ROGRAMMING
To use the remote control to get programs from an off-air
antenna and operate your TV, you must first press
which will do three things:
Turns off the satellite receiver to pass through your
•
off-air antenna to your TV tuner. To watch off-air
channels, you must have an off-air antenna connected
as instructed in Setting Up
Preferred Off-Air Channel on page 12.
Tunes your TV to your preferred off-air channel. This
•
function works only if you have completed the
instructions in Setting Up
Preferred Off-Air Channel on page 12.
Makes the remote control buttons work as described
•
below to support off-air programming. For any of
these buttons to work, you must first have completed
the instructions in Setting Up the Remote to Control
Your TV on page 7.
TV
POWER B
Press the
POWER
VOL VOL
Press these buttons to raise (
volume on the TV.
30
R C
EMOTE
O -A C
FF IR
UTTON
button to turn the TV on or off.
VOLUME B
ONTROL FOR
C
HANNEL ONTROL
UTTON
) or to lower (
+
O -A
FF IR
B
UTTON
to Switch the TV to a
to Switch the TV to a
) the sound
-
TV
,
118866