Connecting Your Satellite Receiver, Vcr; And Tv - Dish Network HM-DSR100RU User Manual

C
ONNECTING
TV
AND
1. Connect a coaxial cable between the
the satellite receiver and the tuner input to the VCR
(see Figure 4).
: If you connect your VCR a different way (for
Note
example, using yellow, red, and white audio/video
RCA-type or S-Video cables), the feature to switch
your VCR to pass satellite programming using
will not work.
2. Look at the boxes you checked on page 8, 9,
and 11. If you checked a box next to "
in the blank below. If you checked a box next to
" ," write "
4
Channel
3. Make sure that the
both your satellite receiver and your VCR are set to
the channel you wrote down in step 2.
: If your satellite receiver does not have a
Note
switch, see your satellite receiver's User's Guide
for how to set
the channel you wrote in step 2.
4. Connect a coaxial cable between the coaxial TV
output connection on the VCR and the tuner input
to the TV.
118866
Y S
OUR ATELLITE
" in the blank below.
4
TV Set Out
R
ECEIVER
switches on the back of
on the satellite receiver to
, VCR,
on
TV Set Out
," write "
3
"
3
15