Table of Contents
Advertisement
10.Release
11.Press
12.Press the
light.
13.If the
does not flash at all, go back to step 9.
14.Press
TV channel you wanted.
S
ETTING
P
ROGRAMMING
Y
TV
OUR
If you want to install a VCR between your satellite
receiver and your TV, follow these instructions to set up
your system and your remote control to switch your
system to watch satellite programming through your VCR
when you press
: The remote control setup for the VCR is only to
Note
allow the
VCR. This remote control does not provide any buttons to
control standard VCR functions.
The first thing you will do is make the right connections
between your satellite receiver, VCR, and TV. After that,
you will set up your remote control. Before you can do
these instructions, you must first complete Setting Up
to Switch the TV to Watch Satellite Programming on
page 5.
14
.
TV
button while watching the
MUTE
light flashes three times, go to step 14. If
to make sure your TV tunes to the off-air
U
P
T
HROUGH
.
to pass satellite programming through your
light flashes.
P
TO
ASS
Y
S
ATELLITE
VCR
OUR
.
TV
TO
118866
Advertisement
Table of Contents
