Setting Up; On The Remote Control - Dish Network HM-DSR100RU User Manual

S U
ETTING
1. In the blank below, write down your preferred off-
air channel that you want your TV to tune to when
you press
2. If step 19 on page 11 is blank and was not used to
set up
3. In the blank below, write down the number
sequence from step 19 on page 11.
4.
If the number you wrote in step 1 is a 2-digit number
In the blank below, write the number sequence
from step 3, except replace "
2-digit number from step 1 (for example, if you
wrote "
channel is Channel 25, write "
5.
If the number you wrote in step 1 is a 1-digit number
In the blank below, write the number sequence
from step 3, except replace "
number from step 1 (for example, if you wrote "
SELECT
Channel 7, write "
6. Write the number sequence you wrote in either
step 4 or step 5 into the blank in step 11 on page 14.
7. Go to step 9.
8. In the blank provided in step 11, write the number
recorded in step 1. If that number has one digit,
write "
9. Press and hold
on (it takes about five seconds).
118866
P ON THE
.
, go to step 8. Otherwise, go to step 3.
0-3-SELECT
" in step 3 and your preferred channel is
" before the number.
0
R
EMOTE
3
" in step 3 and your preferred
3
0-7-SELECT"
until both
C
ONTROL
" or " " with your
0-3
2-5-SELECT
" with your 1-digit
).
SAT
lights turn
TV
:
").
:
0-3-
13