Table of Contents
Advertisement
16.Write the number(s) you circled into the blank in
step 19.
17.Press and hold
on (it takes about five seconds).
18.Release
19.Press
20.Press the
21.If the
If
SAT
17.
22.Press
step 23. If not, go back to step 15.
23.If you want to keep your satellite programming on
TV Channel 3, check the box below and go to
step 28.
24.If you prefer to have your satellite programming on
TV Channel 4, check the box below and go to
step 25.
25.In the blank below, write down the numbers you
circled in Table 1, except replace "
26.Cross out "0-4" on step 10 (page 9) and in the blank
next to the crossed-out text write what you wrote in
step 25.
27.Repeat steps 7 through 14 on page 9, including the
changes you made to step 10.
28.You have completed setting up the
TV control features of the remote control.
118866
.
SAT
(Fill in this blank with the exact sequence you circled in Table 1)
button while watching
MUTE
light flashes three times, go to step 22.
SAT
light does not flash at all, go back to step
. If your TV tunes to Channel 3, go to
3
4
until both
light will flash.
SAT
lights turn
TV
SAT
" with "
3
button and
light.
"
4.
11
Advertisement
Table of Contents
