DirecTV LSS-3200A Owner's Manual page 27

3-4. Connecting to Antennas - Oval Dish (Satellite A, B, C)
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect "Output" of the multi-switch to the "SATELLITE IN" jack on the DIRECTV HD Receiver using a coaxial
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
* Sat C may also be connected via a SAT B/SAT C combiner with a 4x4 multi-switch (not supplied by LG).
NOTE NOTE Cable TVwall jack
RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your satellite dish antenna).
Antenna
® HD Receiver using a coaxial RF cable.
26