DirecTV LSS-3200A Owner's Manual page 26

3. SETUP AND CONNECTIONS
3-4. Connecting to Antennas - Oval Dish (Satellite A, B)
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect the "Jack 1" of the multi-switch to the "SATELLITE IN" jack on the DIRECTV HD Receiver using
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
25
N N P h o n e LNB w a l l j a c k
ANT IN
DIGITAL
AUDIO
OUT
CABLE IN
OUT TO TV
OPTICAL
a coaxial RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your satellite
dish antenna. Use RG6 type cable.)
COMPONENT OUT
VIDEO OUT
(1080i i /720p/480p/480i i )
1 2
DATA PORT
Y
S VIDEO
OUT
RGB OUT
L1 L2 Pb
TYPE
Pr
R1 R2
(1080i/720p/480p) (1080i/720p/480p)
AUDIO OUT
®
RF
REMOTE PHONE
JACK
DVI-HDTV OUT
VCR
CONTROL
(1080i i /720p/480p/480i i )
HD Receiver using a coaxial RF cable.
SATELLITE
IN