Quick Start; Warning!; Wizard - 3DGence ONE Quick Start Manual

QUICK START

1
Take the printer out of the box, remove the
packaging materials and the filament.

WARNING!

4
Attach the spool holder to the printer side
7
the cleaner tube and insert it into the extruder.
2
Remove the yellow shipping clips.
5
Attach the filament cleaner to the upper side of
the printer with the allen tool provided.
8
Attach the power cable to the printer and turn
the printer on.
WWW.3DGENCE.COM/SUPPORT
3
Remove the security foil from the plastic
covers. Attach covers to the printer sides.
6
scissors and place it on the handle.

WIZARD

9