Table of Contents
Advertisement
Using Your System
➢ Locking
Pressing
for one second locks the system. (if the door locks are con-
nected). The horn honks (if connected) and the parking lights flash once
to confirm locking of the system. The optional Failsafe
Starter Kill also
®
activates and prevents the vehicle's starter from cranking.
DRW-226
➢ Unlocking
Pressing
for one second unlocks the doors (if connected). The horn
honks twice (if connected) and the parking lights flash twice to confirm
unlocking of the system. The optional Failsafe Starter Kill is deactivat-
ed.
DRW-226
➢ Disabling (optional) Starter Kill
If your remote control is lost or damaged, you can manually override
the starter kill. You must have the ignition key, and know where the Valet
button is located. Be sure to check with the installer for the location of
the Valet button.
To override the starter kill turn the ignition on, and then press and re-
lease the Valet button one time within 10 seconds. The vehicle should
start, if not you may not have waited too long to release the button: Turn
the ignition off and repeat the process.
Location of Valet button:
____________________
3
© 2009 Directed Electronics. All rights reserved.
Advertisement
Table of Contents
