Cisco Firepower 1010 Hardware Installation Manual page 6

Features
Figure 1: Cisco Firepower 1010
The following table lists the features for the Firepower 1010.
Table 1: Firepower 1010 Features
Feature
Security
standards
certifications
Form factor
Mounting
Airflow
Cisco Firepower 1010 Hardware Installation Guide
2
Description
• Certified on FTD 6.4.x and FX-OS 2.6.x:
• Common Criteria Certification for the Network Device Collaborative Protection
Profile, (NDcPPv2.2E)
• IPS Extended Package (IPSEP v2.11)
• Firewall Collaborative Protection Profile Module (MOD_FW_v1.4e)
• Virtual Private Network Gateway Protection Profile Module
(MOD_VPNGW_v1.1)
• Federal Information Processing Standards (FIPS) 140-2 on FTD 6.4.x and FX-OS
2.6.x
• Department of Defense Information Network Approved Product List (DoDIN APL)
• US Government Compliance for IPv6 (USGv6) on FTD 7.0.x— Certification Approval
under the R1 Profile for the Product Classification "NPP."
See the "Security Certifications Compliance" topic in the "Appliance Platform Settings"
chapter in the Firepower Management Center Configuration Guide, Version 6.7
instructions on how to enable security certifications compliance.
1 RU
Desktop mount
Wall mount (Cisco part number 69-100647-01)
Rack mount (Cisco part number 800-107605-01)
Side-to-side
No fan
Note Because the Firepower 1010 has no fan, the internal system temperature is
significantly higher than the ambient temperature cited in
Specifications, on page 11.
Overview
for the
Hardware