Cisco Firepower 1010 Hardware Installation Manual page 40

Rack-Mount the Chassis
Figure 33: Completed Sliding Rack Tray in Rack Shelf Installation
Step 10
Install the rack shelf into your rack using the correct screws (12-24 x 0.75 inch or 10-32 x 0.75 inch) from the rack-mount
kit that fit your rack type.
You can now attach your power supply cord and run it through the cable guides.
What to do next
Install the cables according to your default software configuration as described in the
Getting Started
Cisco Firepower 1010 Hardware Installation Guide
36
Guide.
Mount the Chassis
Cisco Firepower 1010