Initialization (Reset)/Functional Restriction Setting (Function) - Sharp 8M-B32C1 Operation Manual

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

You can reset the settings to the factory default settings or
restrict operations.
1. Press the MENU button and INPUT button at the same
time until "F" is displayed in the upper left area of the
screen, then while "F" is being displayed, press the
MENU button.
FUNCTION
ALL RESET
ADJUSTMENT LOCK
COMMAND CONTROL
LED
TEMPERATURE ALERT
STATUS ALERT
2. Select and set the items.
ALL RESET
Resets the settings to the factory default settings.
After pressing the ENTER button, select ALL RESET if
you want to reset, and press the ENTER button again.
All settings will be reverted to the factory default.
After initialization, turn the main power switch off and
then back on.
ADJUSTMENT LOCK
You can disable operations on the monitor that use
buttons.
OFF .... Enables operation.
ON 1 ... Disables all operations other than turning power
on/off and FUNCTION.
ON 2 ... Only the FUNCTION operation is enabled.
Disables all operations other than FUNCTION
(not even power on/off).
COMMAND CONTROL
Switches whether to permit control from USB.
LED
Specifies whether to light the power LED.
TEMPERATURE ALERT
Selects the notification method for an abnormal
temperature.
OFF ................ Do not notify about an abnormal
temperature.
OSD & LED .... When an abnormal temperature is
detected, the power LED flashes in red
and green alternately and the screen
displays a message: TEMPERATURE.
LED................. When an abnormal temperature is
detected, the power LED flashes in red
and green alternately.
OFF
UNLOCKED
ON
OSD & LED
OSD & LED
OK:[ENTER] END:[RETURN]
STATUS ALERT
Selects the notification method for a hardware error.
OFF ................ Do not notify about the error.
OSD & LED .... When a hardware error is detected, the
power LED flashes in red and the screen
displays a message: STATUS [xxxx].
LED................. When a hardware error is detected, the
power LED flashes in red.
3. Press the RETURN button to return to the normal
screen.
TIPS
• When both abnormal temperature and hardware error are
detected, the hardware error notification overrides.
• If TEMPERATURE ALERT or STATUS ALERT is set to LED
or OSD & LED, the power LED lights even if LED is set to
OFF.
25
E