Initialization (Reset)/Functional Restriction Setting (Function) - Sharp PN-B401 Operation Manual

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

You can reset the settings to the factory default settings or
restrict operations.
To initialize the APPLICATION mode settings, select "System
Setting" – "Backup & reset" – "Factory data reset" on the
CONTENT MENU screen of APPLICATION mode.
1. Press the FUNCTION button, and then press the MENU
button within 10 seconds.
FUNCTION
ALL RESET
ADJUSTMENT LOCK
ADJUSTMENT LOCK TARGET
OSD DISPLAY
LED
TEMPERATURE ALERT
STATUS ALERT
APPLICATION SETTING
POWER BUTTON
EXTERNAL CONTROLLER INPUT
APPLICATION REBOOT
UPDATE MAIN SOFTWARE
OPTION
2. Select and set the items.
ALL RESET
Resets the settings to the factory default settings.
Press the ENTER button, select the resetting method,
and then press the ENTER button.
After initialization, turn the main power switch off and
then back on.
ALL RESET 1 ...Resets all the settings to the factory
default settings.
In APPLICATION mode, only the settings
of the factory-installed applications are
initialized.
ALL RESET 2 ...Returns all settings to the factory default
settings except for the following items:
ID No. SET, REMOTE No., RS-232C/
LAN SELECT, BAUD RATE, each
application of APPLICATION mode
ADJUSTMENT LOCK
You can disable operations on the monitor and the
remote control unit that use buttons.
OFF ...Enables operation.
ON 1 ..Disables all operations other than turning power
on/off and FUNCTION.
ON 2 ..Only the FUNCTION operation is enabled.
Disables all operations other than FUNCTION (not
even power on/off).
ADJUSTMENT LOCK TARGET
Sets the target to prohibit operation of with
ADJUSTMENT LOCK.
REMOTE CONTROL ..... Prohibits remote control
MONITOR BUTTONS ... Prohibits monitor button
BOTH ............................. Prohibits remote control and
OFF
ON 1
ON
LED
OFF
ON
MONITOR
ON
OK:[ENTER] END:[RETURN]
operation
operation
monitor button operation
OSD DISPLAY
Shows/hides the menu, modes and messages.
The FUNCTION screen cannot be hidden.
ON 1 .............. Shows all menus, modes and messages.
ON 2 .............. Hides messages automatically displayed
by the display. Shows messages during
operation.
OFF ............... Hides all menus, modes and messages.
LED
Specifies whether to light the power LED.
TEMPERATURE ALERT
Selects the notification method for an abnormal
temperature.
OFF ................ Do not notify about an abnormal
temperature.
OSD & LED .... When an abnormal temperature is
detected, the power LED flashes in red
and green alternately and the screen
displays a message: TEMPERATURE.
LED................. When an abnormal temperature is
detected, the power LED flashes in red
and green alternately.
STATUS ALERT
Selects the notification method for a hardware error.
OFF ................ Do not notify about the error.
OSD & LED .... When a hardware error is detected, the
power LED flashes in red and the screen
displays a message: STATUS [xxxx].
LED................. When a hardware error is detected, the
power LED flashes in red.
APPLICATION SETTING
Set whether or not APPLICATION mode is used.
OFF .............. Do not use APPLICATION mode. The
input mode cannot be changed to
APPLICATION.
ON ................ Use APPLICATION mode.
33
E