Advertisement

Quick Links

Instructions when using for the first time
Inserting the batteries
1.
Taking photographs
2.
Viewing photographs and video clips
3.
Connecting the camera to a computer
4.
Layout of the instruction manual
Inserting the batteries and function explanation (4, 5)
Normal camera operation
Other functions and operation
Installation and using the software
Use with a Macintosh
Troubleshooting
1
Introduction
This instruction manual is for users of the TRUST 920 POWERC@M ZOOM. This
This instruction manual is for users of the TRUST 920 POWERC@M ZOOM. This
camera has a 3.1 Megapixel sensor resolution and a 5.5 Megapixel camera
camera has a 3.1 Megapixel sensor resolution and a 5.5 Megapixel camera
resolution. The LCD screen allows you to see the photograph you are taking or the
resolution. The LCD screen allows you to see the photograph you are taking or the
video clip you are recording. You can also view the photographs and video clips
video clip you are recording. You can also view the photographs and video clips
immediately.
immediately.
The camera can also be used as a webcam.
The camera can also be used as a webcam.
1.1
1.1
General comments regarding photography
General comments regarding photography
Test photograph
Test photograph
Before you start photographing a unique event, it is a good idea to first take a
Before you start photographing a unique event, it is a good idea to first take a
number of test photographs. This will help to ensure that the camera works as
number of test photographs. This will help to ensure that the camera works as
required.
required.
No compensation for unsuccessful photographs
No compensation for unsuccessful photographs
No compensation may be claimed for unsuccessful photographs as a result of a
No compensation may be claimed for unsuccessful photographs as a result of a
faulty camera, faulty software, etc.
faulty camera, faulty software, etc.
Exchanging photographs and video clips
Exchanging photographs and video clips
No guarantees are given that photographs and video clips produced with this camera
No guarantees are given that photographs and video clips produced with this camera
can be displayed on other devices or that photographs and video clips produced with
can be displayed on other devices or that photographs and video clips produced with
other devices can be displayed using this camera.
other devices can be displayed using this camera.
Sunlight
Sunlight
Do not aim the camera directly at the sun for a long period of time. This may damage
Do not aim the camera directly at the sun for a long period of time. This may damage
the sensor.
the sensor.
Shaking/knocks
Shaking/knocks
Do not shake the camera or knock it against anything, because this may cause a
Do not shake the camera or knock it against anything, because this may cause a
fault, unsuccessful photographs, memory incompatibility or the loss of photographs
fault, unsuccessful photographs, memory incompatibility or the loss of photographs
from the memory.
from the memory.
LCD screen
LCD screen
There may sometimes be small black or clear dots visible on the LCD screen. This is
There may sometimes be small black or clear dots visible on the LCD screen. This is
normal and does not affect the photographs. There is no reason to exchange the
normal and does not affect the photographs. There is no reason to exchange the
camera if there are 10 dots or less.
camera if there are 10 dots or less.
Exposing the LCD screen to direct sunlight for a long period of time may cause faults.
Exposing the LCD screen to direct sunlight for a long period of time may cause faults.
TRUST 920 POWERC@M ZOOM
Chapter
!
(4)
(6)
(7)
U K
(8)
Chapter
(6 to 8)
(9 to 17)
(18, 19)
(20)
(21)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerCam Zoom 920 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Trust PowerCam Zoom 920

  • Page 1 (21) Introduction This instruction manual is for users of the TRUST 920 POWERC@M ZOOM. This This instruction manual is for users of the TRUST 920 POWERC@M ZOOM. This camera has a 3.1 Megapixel sensor resolution and a 5.5 Megapixel camera camera has a 3.1 Megapixel sensor resolution and a 5.5 Megapixel camera...
  • Page 2 Safety Carefully read the following instructions before use. The TRUST 920 POWERC@M ZOOM does not require any special maintenance. Use a slightly damp, soft cloth to clean the camera. Do not use aggressive substances, such as white spirit, to clean the device.
  • Page 3: Inserting/Removing The Batteries

    TRUST 920 POWERC@M ZOOM Inserting/removing the batteries Follow the instructions given below to insert or remove the batteries Note: Make sure the camera is turned off. Open the battery cover on the bottom of the camera by sliding it in the direction indicated by the arrow and folding it open.
  • Page 4 TRUST 920 POWERC@M ZOOM Point Description Function Focus - Macro For photographs at a distance between 45 cm and 80 cm. Table 2: Functions on the front of the camera Functions at the rear of the camera (see figure 2).
  • Page 5: Standard Camera Operation

    TRUST 920 POWERC@M ZOOM Functions on the side of the camera (see figure 4). Point Description Function Audio/Video connection Connection for connecting the camera to a television. USB connection Connection for connecting the camera to the USB port of a computer.
  • Page 6 If it does not start automatically, carry out the following: Select 'Run' from the Windows Start menu. Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software Installer. The Trust Software Installer will appear (see figure 6).
  • Page 7: Symbol Function

    TRUST 920 POWERC@M ZOOM Windows 98 / Windows ME / Windows 2000 Open ‘My Computer’. Open the ‘Removable Disk’. Note: The drive letter of the ‘Removable disk’ can vary for different computers. Open the ‘DCIM’ folder. Open the ‘100CX300’ folder.
  • Page 8: Lcd Screen

    TRUST 920 POWERC@M ZOOM Play games: Snake or Tetris. Set-up mode Configures the camera (see chapter 10). Table 6: Mode settings LCD screen The LCD screen allows you to view the photographs and video clips, use the menu, etc. If you turn the LCD screen off, the batteries will have a longer life span.
  • Page 9 TRUST 920 POWERC@M ZOOM Turn the camera on (3, figure 4). Turn the rotary button (1, figure 4) to the Set-up position ( Scroll through the functions by pressing the control button to the left and right. Press the control button up or down to select an option. Press ‘OK’ to confirm the selection.
  • Page 10: Taking A Photograph

    The digital zoom does not work when recording video clips. 11.2 Using the macro function (close-up photographs) The Trust 920 PowerC@m Zoom has a macro function which can be used to take photographs at a minimum distance of 45 cm. Selecting the macro mode: Rotate the lens (5, figure 1) to the correct position.
  • Page 11: Automatic Exposure

    TRUST 920 POWERC@M ZOOM included in the photograph. You can also use the LCD screen. This always gives greater accuracy. Note: It is recommended to use the stand and the automatic exposure function (see chapter 11.3) when using the macro mode.
  • Page 12 TRUST 920 POWERC@M ZOOM Note: Under normal circumstances, it takes between 6 and 10 seconds to recharge the flash, depending on the battery power. Note: The flash cannot be used when the battery power is low. Replace the batteries 11.6...
  • Page 13 TRUST 920 POWERC@M ZOOM Point Options Comments Colour effect Colour (RGB) Applies a certain effect to a photograph. Sepia gives a brown Sepia tint to the photographs and black/white makes the Black-and-white (B/W) photographs black-and-white. White Balance Auto Sets the colour balance (see chapter 11.8.4).
  • Page 14: White Balance

    TRUST 920 POWERC@M ZOOM Note: The numbers given in the table below are only an indication of the expected capacity. Resolution 5.5 M 3.1 M 1.3 M Quality Super Fine Fine Normal Table 12: Number of photographs that can be saved in the camera’s internal memory 11.8.3...
  • Page 15 TRUST 920 POWERC@M ZOOM Note: The digital zoom cannot be used when recording a video clip. Note: Sound is recorded with the video clips. It is not possible to turn the microphone off. The noise of the surroundings will be included in the video clip.
  • Page 16: Menu Settings

    TRUST 920 POWERC@M ZOOM Tip: If you do not see an image and your speakers emit a loud noise, then you have probably connected the video plugs to the wrong connection on your TV. Check the connections and try again or see the instruction manual provided with your TV.
  • Page 17: Inserting/Removing A Memory Card

    See the instruction manual provided with your printer. Inserting/removing a memory card The Trust 920 PowerC@m ZOOM has a 16 MB internal memory. By default, photographs and video clips are saved in the internal memory. This memory can be extended with an SD (Secure Digital) or an MMC (Multi Media Card) memory card.
  • Page 18: Formatting The Memory

    TRUST 920 POWERC@M ZOOM 14.1 Inserting/removing a memory card Follow the instructions given below to insert a memory card. Turn the camera off. Open the battery cover. Insert the memory card into the camera as indicated on the battery compartment (see figure 7). Press the memory card into the slot until it clicks into place.
  • Page 19 TRUST 920 POWERC@M ZOOM Set the camera to the ‘PC Camera’ mode as described in chapter 8.2. Next, select 'PC-CAM’. Connect the camera to your computer (see chapter 8.2). Windows will detect new hardware. The driver will now be installed automatically.
  • Page 20: Playing Games

    The conditions can be found at www.trustphotosite.com. 18.1 Installing the Trust Photo Upload software This software can be used to upload your photographs to the Trust Photo Site. Note: The latest version of the Trust Photo Upload software can always be downloaded from the Trust website.
  • Page 21 Click on ‘Continue’. In the window that appears, you can download software for uploading your photographs to the Trust Photo Site. You can download the latest version of the software here. (The Trust Photo Upload software is also included on the CD-ROM supplied with the camera.)
  • Page 22: Installation

    This chapter explains the most important functions of the program. See the Help function of the various programs if you require further information. Also see the detailed ArcSoft instruction manual on the Trust installation CD-ROM. This can be opened using the Trust Software Installer.
  • Page 23 TRUST 920 POWERC@M ZOOM - Undo or repeat an edit. - Copy and paste. - Delete a layer and close the photograph. After using the standard editing options, click on the ‘Edit’ button (B, figure 9) to use the advanced editing options.
  • Page 24 TRUST 920 POWERC@M ZOOM USE WITH A MACINTOSH This camera can be used with an Apple Macintosh computer. Use with a Macintosh This chapter gives a short explanation of how to connect the camera to a Macintosh computer. Mac software is not supplied with the camera.
  • Page 25: Troubleshooting

    TRUST 920 POWERC@M ZOOM Troubleshooting Method Read the solutions given below. Check for up-to-date FAQ’s, drivers and instruction manuals on the Internet (www.trust.com/13791). 21.1 Installation 21.1.1 Uninstalling old drivers and devices The most common cause of faults during installation is the presence of a driver for a similar, old device.
  • Page 26: Installed Software

    TRUST 920 POWERC@M ZOOM Windows 2000 Disk driver – 300_CAMERA USB Device Storage volumes – Generic volume Universal Serial Bus Controllers – USB Mass Storage Device Windows XP Disk drives – 920 PowerC@m ZOOM USB Device Storage volumes – Generic Volume Universal Serial Bus controllers –...
  • Page 27: Solving Other Problems

    TRUST 920 POWERC@M ZOOM 21.3 Solving other problems 21.3.1 Problems with the camera Problem Cause Possible solution The camera is set to the 5.5 Reduce the resolution to 3.1 The digital zoom Megapixel resolution. Megapixels or less. does not work.
  • Page 28 TRUST 920 POWERC@M ZOOM chapter 11.6). In order to charge the flash, Replace the batteries will full The flash cannot be more power is required than batteries (see chapter 4). turned on. is contained in the batteries. The battery power is low.
  • Page 29 TRUST 920 POWERC@M ZOOM There are more folders, i.e. Look for the photographs The photographs and 100CX300, 101CX300, etc. and video clips in another video clips cannot be folder. found in the folder. The LCD screen is The camera has not been Click on On/Off button.
  • Page 30 TRUST 920 POWERC@M ZOOM The error message The camera has not been Connect the camera to a connected to a USB port. USB port ‘Capture device was not detected’ is The camera has been Connect the camera to a displayed.
  • Page 31 TRUST 920 POWERC@M ZOOM If I disconnect my The device was not turned Since the camera is a camera from the USB off in Windows. storage medium, it is port, I receive a possible that it was being message saying that it...
  • Page 32 Troubleshooter. e/help/camera If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. You can find more information at the back of this instruction manual. Please have the following information available: •...
  • Page 33: Technical Specifications

    TRUST 920 POWERC@M ZOOM Technical specifications Camera resolution 2720 x 2040 / 5.5 Megapixel Hardware sensor resolution 2048 x 1536 / 3.1 Megapixel Internal memory Built-in 32MB SDRAM (buffer) 16 MB flash memory (storage) External memory Built-in SD/MMC slot (maximum: 512 MB)
  • Page 34: Warranty Conditions

    TRUST 920 POWERC@M ZOOM Warranty conditions - Our products have a two-year manufacturer's warranty which is effective from the date of purchase. - If there is a fault, return the product to your dealer. Include an explanation of the fault, the proof of purchase and all the accessories.

Table of Contents