Trust 750 LCD POWERCAM ZOOM Instruction Manual
  1. Manuals
  2. Brands
  3. Trust Manuals
  4. Digital Camera
  5. 750 LCD POWERC@M ZOOM
  6. Instruction manual

Trust 750 LCD POWERCAM ZOOM Instruction Manual

Hide thumbs Also See for 750 LCD POWERCAM ZOOM:
Table of Contents

Advertisement

Quick Links

Instructions when using for the first time
Using the camera
1.
2.
Installing the camera
Installing the application software
3.
Using the camera's driver
4.
Using the ArcSoft programs
5.
1
Introduction
This instruction manual is for users of the TRUST 750 LCD POWERC@M ZOOM.
The TRUST 750 LCD POWERC@M ZOOM can be used to take photographs, to
record live video images or as a webcam for videoconferencing on the Internet. The
applications supplied with the camera have a wide range of options for editing
photographs and video clips. When the Trust 750 LCD POWERC@M ZOOM is
connected to your computer, it can be accessed directly like a removable disk. You
can then open the photographs and video clips, edit them, send them via e-mail, save
them on your computer, etc. The camera also works with Mac OS 8.9~9.1 and 10.1
or later releases as a mass storage device.
2
Safety
2.1
General information
Carefully read the following instructions before use.
- The TRUST 750 LCD POWERC@M ZOOM does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
- Do not use aggressive substances, such as white spirit, to clean the device. These
may harm the material.
- Do not submerge the device in liquid. This may be dangerous and will damage the
device. Do not use this device near water.
- Make sure nothing is placed on the cable. Do not use this device in an area where
the cable can become worn or damaged as a result of people walking over it.
- Do not repair this device yourself. If you open this device, you may touch live
components.
- Under the following circumstances, have the device repaired by qualified
personnel:
- The cable or plug is damaged or worn.
- The device has come into contact with rain, water or another liquid.
2.2
Batteries
- The alkaline batteries supplied are not rechargeable. Do not try to recharge them,
because this may cause them to explode.
- Never throw the batteries onto an open fire. The batteries may explode.
- Never drill holes into the batteries.
- Keep the batteries out of the reach of small children.
- Only use AA alkaline batteries with this camera. You can also use rechargeable
AA NiMH batteries (minimum 1800 mAh).
- When the alkaline batteries are empty, ask your local authority where you can
dispose of them.
Note:
Standard AA NiCd batteries are unsuitable for use with this
device.
Note:
Do not use old and new batteries at the same time, because the
old batteries may deplete the new ones.
Note:
The batteries should be removed if the camera is not going to be
used for some time. This will save the battery capacity.
3
Approval
TRUST 750 LCD POWERC@M ZOOM
Chapter
(6)
!
(7)
(8)
(9)
(10)
1
U K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 750 LCD POWERCAM ZOOM and is the answer not in the manual?

Questions and answers

Related Manuals for Trust 750 LCD POWERCAM ZOOM

Summary of Contents for Trust 750 LCD POWERCAM ZOOM

  • Page 1 (10) Introduction This instruction manual is for users of the TRUST 750 LCD POWERC@M ZOOM. The TRUST 750 LCD POWERC@M ZOOM can be used to take photographs, to record live video images or as a webcam for videoconferencing on the Internet. The applications supplied with the camera have a wide range of options for editing photographs and video clips.

  • Page 2: Inserting The Batteries

    Insert the two AA alkaline batteries as shown on the inside of the battery flap. Close the battery compartment again by pushing it closed and sliding it into place. The TRUST 750 LCD POWERC@M ZOOM is now ready for use. Note: Inserting the batteries incorrectly may cause damage to the camera.
  • Page 3 TRUST 750 LCD POWERC@M ZOOM Function Description Macro mode The macro switch (7, figure 1) can be used to select the macro mode. Set the switch to one of the two positions. : Macro mode: select this mode to take close-up photographs (distance 20 to 25 cm).
  • Page 4 TRUST 750 LCD POWERC@M ZOOM See figure 2 and table 2 below for a description of the various functions at the back of the camera. Item Name Description LCD screen On the (TFT) LCD screen, you can view the subject to be photographed (Preview), view photographs and video clips, view the camera settings, and use and set the camera menu.
  • Page 5 TRUST 750 LCD POWERC@M ZOOM Explanation of the multiselect button and the menu button The multiselect button (3, figure 2) can be turned to the left and right. You can then access the different menus which are available with the camera.
  • Page 6 TRUST 750 LCD POWERC@M ZOOM Description SYSTEM Language English* Displays the camera menu in English. French Displays the camera menu in French. German Displays the camera menu in German. Italian Displays the camera menu in Italian. Japanese Displays the camera menu in Japanese.
  • Page 7 TRUST 750 LCD POWERC@M ZOOM Explanation of the status icons on the LCD screen See table 4 below for a description of the various status icons shown on the camera’s LCD screen (J, figure 1). Use table 4 in combination with figure 3.
  • Page 8 TRUST 750 LCD POWERC@M ZOOM Item Function Description Light balance Displays the light balance setting. indicator = Automatic light balance = Light balance for fluorescent lighting. = Light balance for sunny weather. = Light balance for incandescent lighting. Morning/afternoon Displays whether it is morning or indicator afternoon.

  • Page 9: Quick Menu

    TRUST 750 LCD POWERC@M ZOOM Quick menu The previous sections of chapter 5 explain how to use the different menus. These menus are advanced menus which require a fair number of operations before the desired setting can be made. If you wish to change a setting quickly whilst taking photographs, you can also use the quick menu.

  • Page 10: Using The Camera

    Inserting a memory card (not included) The Trust 750 LCD POWERC@M ZOOM has a 16 MB internal memory. This memory can be extended with a SD or MMC memory card (not included).

  • Page 11: Taking Photographs

    TRUST 750 LCD POWERC@M ZOOM Taking photographs Follow the instructions given below to take photographs using the Trust 750 LCD PowerC@m Zoom. Turn the camera on by sliding the ON/OFF button (2, figure 1) open. Set the camera to the photo mode ( ) using button 3 (see figure 2).

  • Page 12: Recording Video Clips

    Recording video clips The Trust 750 LCD PowerC@m Zoom can also be used to record short video clips at 15 frames per second and with a resolution of 352 x 288. The video clip will be saved in AVI format.
  • Page 13 TRUST 750 LCD POWERC@M ZOOM arrow button (7, figure 2). You can stop playing the video clip by pressing the menu button’s middle button (6, figure 2). Press the left arrow button to return to the play mode. 6.10 Deleting photographs and video clips You can choose to delete a single photograph or video clip or to delete all the photographs and video clips from the memory.

  • Page 14: Installing The Camera

    If it does not start automatically, carry out the following: Select 'Run' from the Windows Start menu. Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software Installer. The Trust Software Installer will appear (see figure 4).

  • Page 15: Connecting The Camera

    TRUST 750 LCD POWERC@M ZOOM Connecting the camera The camera can be connected to a computer in two different ways: as a mass storage device and as a PC camera for videoconferencing on the Internet. 7.3.1 Connecting as a mass storage device This option makes it possible to download photographs and video clips onto your computer.

  • Page 16: Checking After The Installation

    - Disk Drives – IDIGAT L ACEMAR USB Device - Storage volumes – Generic volume - Universal Serial Bus Controllers – TRUST 750 LCD POWERC@M ZOOM ‘Start – Settings – Control Panel’ and then double-click on the ‘Add/Remove Programs’ icon.

  • Page 17: Installing The Application Software

    Install the applications as follows. Follow points 1 to 3 of chapter 7.2 to start the Trust Software Installer. Click on one of the applications mentioned above.

  • Page 18: Using The Driver

    Open ‘My Computer’. All of your computer’s available disks will be displayed. If you do not have any similar devices installed on your computer, the disk entitled ‘Removable disk’ is the Trust camera. Double-click on the ‘Removable disk’. Your photographs will appear in Windows Explorer.
  • Page 19 This contains a description of all the functions available with NetMeeting. 9.3.2 Webcam & Internet The Trust 750 LCD PowerC@m Zoom can also be used as a webcam, for example, on your Internet page. A number of informative sites about webcams are given below.
  • Page 20 In PhotoBase 3.0, the Help function is opened by clicking on the ‘Help’ menu in the menu bar and then selecting ‘Contents’. Also see the detailed Arcsoft instruction manual on the Trust installation CD-ROM. This can be opened using the Trust Software Installer (see figure 4). This has the instruction manuals for PhotoBase 3.0, VideoImpression 1.6 and FunHouse 1.0 combined in one document.
  • Page 21 TRUST 750 LCD POWERC@M ZOOM 10.2 PhotoImpression 3.0 PhotoImpression is a photograph editing program. You can use PhotoImpression to edit, enhance and alter photographs as you wish. Open PhotoImpression via the Windows Start menu (Start – Programs – Arcsoft – Arcsoft PhotoImpression 3 – PhotoImpression 3).
  • Page 22 TRUST 750 LCD POWERC@M ZOOM The final option is ‘Print’ (E, figure 5). Select this option if you wish to print the photograph. You can print the photograph as a normal photograph, as a greetings card or as a small photograph.
  • Page 23 Click on www.apple.com/software or go to http://download.cnet.com and select MAC to download photograph editing programs for the Mac. To remove the Trust 750 LCD PowerC@m Zoom from your Macintosh system, drag the ‘200_CAMERA’ folder on your desktop to the Trash and disconnect the camera...
  • Page 24 Removing the camera’s driver Follow the instructions below if you wish to remove the driver for the Trust 750 LCD PowerC@m Zoom from your computer. Click on ‘Start – Programs – Trust – 750 LCD POWERC@M ZOOM –...

  • Page 25: Troubleshooting

    The TRUST 750 between the camera 1) Remove the TV Capture and the TV card. card. POWERC@M 2) Install the TRUST 750 LCD ZOOM does not POWERC@M ZOOM. work in 3) Install the TV capture card. combination with the TV/capture card.
  • Page 26 TRUST 750 LCD POWERC@M ZOOM Problem Cause Possible solution The batteries are Replace the batteries (see empty. chapter 4). The camera does The camera must be Disconnect the USB cable reset. and remove the batteries from not react, the camera. Reinsert the...
  • Page 27 TRUST 750 LCD POWERC@M ZOOM Problem Cause Possible solution If a too high VGA Set your VGA card to a lower resolution is used (for resolution and colour depth example, 1600 x (for example, 800 x 600 / 16- 1200), it is possible bit colour).

  • Page 28: Warranty Conditions

    Troubleshooter. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. You can find more information at the back of this instruction manual. Please have the following information available.

Table of Contents