Delta Electronics Network Device DOP-A/AE/AS Connection Manual page 87

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
Mitsubishi FX Series PLC via Computer Link
A. HMI factory settings
Baud rate: 9600, 7, EVEN, 1.
Controller Station number: 0.
Control area/status area: D0 / D10.
NOTE
1) This communication protocol supports FX series RS485 and RS232 communication module.
2) The default setting of this communication protocol is to support RS485 communication module. If the
user needs to use RS232 communication module, the user must change the communication setting from
RS485 to RS232 manually.
3) For more detailed information regarding the communication setting method, please refer to Mitsubishi
Communication User Manual named "User's Manual - Data Communication Edition".
B. Definition of controller Read/Write address
Registers
Register Type
Auxiliary Relay
Special Auxiliary Relay
Status Relay
Input Relay
Output Relay
Timer PV
16-bit Counter PV
32-bit Counter PV
Data Register
Special Data Register
Auxiliary Relay / Special Auxiliary Relay / Status Relay / Input Relay / Output Relay: Address must be
the multiple of 16.
Contacts
Contact type
Auxiliary Relay
Special Auxiliary Relay
Status Relay
1-86
Read/Write Range
Format
Word No.
Mn n: 0-7679
Mn n: 8000-8511
Sn n: 0-4095
Xn n: 0-377(octal)
Yn n: 0-377(octal)
Tn n: 0-255
Cn n: 0-199
Cn n: 200-255
Dn n: 0-7999
Dn n: 8000-8511
Format
Mn N/A
Mn N/A
Sn N/A
Bit No.
N/A Word
N/A Word
N/A Word
N/A Word
N/A Word
N/A Word
N/A Word
N/A Double Word
N/A Word
N/A Word
Read/Write Range
Word No.
n: 0-7679
n: 8000-8511
n: 0-4095
Revision January, 2008, Doc. Name: 2007PDD23000007
Back to Table
Data length
Bit No.