Delta Electronics Network Device DOP-A/AE/AS Connection Manual page 35

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
GE Fanuc 90 Series SNP PLC
A. HMI factory settings
Baud rate: 19200, 8, ODD, 1.
Controller Station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC)
communication is allowed.)
Control area/status area: %R1 / %R10.
NOTE
1) Please notice that no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication
is allowed.
2) If the PLC enabled "Check Password" function, the user needs to set the password by clicking Option >
Configuration > Communication. The user can find Controller Settings and set PLC password on
Communication Tab in the Configuration dialog box. Please enter a 4-digit password (If entering a
password that exceeds 4-digit number, only the first 4-digit number is valid).
B. Definition of controller Read/Write address
Registers
Register Type
Discrete Inputs
Discrete Outputs
Discrete Temporaries
Discrete Internals
%SA Discretes
%SB Discretes
%SC Discretes
%S Discretes
Genius Global Data
Registers
Analog Inputs
Analog Outputs
1-34
Read/Write range
Format
Word No.
%In n: 1 ~ 12288
%Qn n: 1 ~ 12288
%Tn n: 1 ~ 256
%Mn n: 1 ~ 12288
%SAn n: 1 ~ 128
%SBn n: 1 ~ 128
%SCn n: 1 ~ 128
%S-n n: 1 ~ 128
%Gn n: 1 ~ 7680
%Rn n: 1 ~ 16384
%AIn n: 1 ~ 8192
%AQn n: 1 ~ 8192
Bit No.
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word (the multiple of 16 + 1)
N/A Word
N/A Word
N/A Word
Revision January, 2008, Doc. Name: 2007PDD23000007
Back to Table
Data length