Advertisement
Advertisement
Table of Contents
Related Manuals for ML Accessories WALL1
Summary of Contents for ML Accessories WALL1
- Page 1 INSTALLATION & MAINTENANCE MANUAL WALL1 / WALL2 / WALL3...
- Page 2 These instructions should be used to aid installation of the following products: WALL1 / WALL2 / WALL3 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 Suitable IP rated junction boxes should be used where required Using the Allen key provided, carefully loosen the three grub screws securing the baseplate to the • luminaire (see Fig. 1) Loosen grub screws Loosen grub screws Fig. 1 Fig. 1 Fig.
- Page 4 • Replace the luminaire onto the baseplate and fasten the three grub screws • Unscrew the bezel, insert a suitable GU10 lamp and carefully replace the bezel ensuring that the seal is in place and not damaged • Switch on and check for correct operation WARNING This product is not suitable for installation in or near a coastal or marine environment.
- Page 5 If this product should fail within its warranty period it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve...
- Page 6 INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS ML Accessories Limited LU5 4LT www.mlaccessories.co.uk DCAUG21_V5...
Need help?
Do you have a question about the WALL1 and is the answer not in the manual?
Questions and answers