Table of Contents
Advertisement
Available languages
Available languages
EXTENSION CORdS
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-
wire extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the
machine's plug. When using an extension cord, be sure to use one heavy enough to carry the current of the
machine. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig.
d-1 or d-2, shows the correct gauge to use depending on the cord length. If in doubt, use the next heavier
gauge. The smaller the gauge number, the heavier the cord.
MINIMUM gAUgE EXTENSION CORd
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Total Length
Rating
Volts
of Cord in Feet
0-6
120
up to 25
0-6
120
25-50
0-6
120
50-100
0-6
120
100-150
6-10
120
up to 25
6-10
120
25-50
6-10
120
50-100
6-10
120
100-150
10-12
120
up to 25
10-12
120
25-50
10-12
120
50-100
10-12
120
100-150
12-16
120
up to 25
12-16
120
25-50
12-16
120
GREATER THAN 50 FEET NOT RECOMMENDED
Fig. d-1
FOREWORd
The DELTA 10" (254 mm) Hybrid saw (36-714) has a powerful 1-3/4 HP induction motor that can handle tough cutting
operations. This table saw has a maximum depth of cut of 3-1/8" (79 mm) at 90° and 2-1/8" (54 mm) at 45°. The maximum
dado width with this saw is 13/16" (21 mm). The saw comes with two cast-iron extension sings, one of three fence systems,
see-through blade guard and splitter, throat plate, equipment mounting hooks, a 10" (254 mm) diameter blade, dust port for
4" (101.6 mm) hose amd miter gauge.
NOTICE: The illustration on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
gauge of
Extension Cord
18 AWg
16 AWg
16 AWg
14 AWg
18 AWg
16 AWg
14 AWg
12 AWg
16 AWg
16 AWg
14 AWg
12 AWg
14 AWg
12 AWg
FUNCTIONAL dESCRIPTION
MINIMUM gAUgE EXTENSION CORd
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating
Volts
of Cord in Feet
0-6
240
0-6
240
0-6
240
0-6
240
6-10
240
6-10
240
6-10
240
6-10
240
10-12
240
10-12
240
10-12
240
10-12
240
12-16
240
12-16
240
12-16
240
8
Total Length
gauge of
Extension Cord
up to 50
18 AWg
50-100
16 AWg
100-200
16 AWg
200-300
14 AWg
up to 50
18 AWg
50-100
16 AWg
100-200
14 AWg
200-300
12 AWg
up to 50
16 AWg
50-100
16 AWg
100-200
14 AWg
200-300
12 AWg
up to 50
14 AWg
50-100
12 AWg
GREATER THAN 100 FEET NOT RECOMMENDED
Fig. d-2
NOTICE
fr
AVIS
sp
AVISO
Advertisement
Table of Contents
