AcuRite 06101M Quick Setup Manual

SETUP REQUIRES:
• Display
• Power Adapter (3 AAA backup batteries recommended)
• 5-in-1 Sensor (may be sold separately)
1
PLUG IN DISPLAY AND CONFIGURE SETTINGS
Plug in the power adapter. Once the display is powered on, configuration will begin
automatically. Use the Up and Down arrows to select between options, and press the
SET button to confirm your selections.
• Clock Hour/Minute
• Month/Day/Year
• Units of Measurement (U.S. Standard/Metric)
You can configure these settings at any time by pressing the SET button.
Tip: Press the blue (outdoor) or yellow (indoor) buttons to review high and low records.
2
INSTALL SENSOR BATTERIES
In the 5-in-1 outdoor sensor battery compartment, install four AA alkaline or lithium
batteries. The Display should automatically sync with the sensor and start showing
readings within a minute.
NOTE: In the battery compartment of the sensor, there is a small switch A/B/C switch
that should match the selection on the Display. By default this is "A" and doesn't need
adjustment.
3
MOUNT SENSOR
Find a suitable place to mount the outdoor sensor:
• At least 5 feet (1.5 meters)
off the ground
• Front solar cell facing south
• Away from heat and humidity
sources
1
• Level for accurate rain
reporting using bubble level
on top of sensor
Once the sensor is mounted,
remove the rain gauge stabilizer
from sensor.
A B C
A-B-C Switch
Set to match
display
Rain Gauge Stabilizer
Install Batteries
Remove and discard
4 AA Batteries
Set up your Weather Station
Connect to My AcuRite with Wi-Fi
SETUP REQUIRES:
• 2.4 GHz Wireless Network
• Phone, Tablet, or Computer with Wi-Fi
• Display set up with 5-in-1 Sensor
1
CONNECT TO DISPLAY WI-FI
Connect to the Wi-Fi signal coming from
your Display using your phone or Wi-Fi com-
patible device.
2
ACCESS WI-FI SETUP PAGE
Open a web browser on your device. Type
"192.168.4.1" in the address bar and press
enter to access the AcuRite Wi-Fi display
settings website.
ADDITIONAL NOTES
The Wi-Fi set up page is available for 30 minutes after the display is powered on.
Press the SET button to re-activate the setup page at any time.
To retain Wi-Fi configuration details, backup batteries are strongly recommended in the
display. The display can be power cycled at any time to clear Wi-Fi credentials.
06101M
3
ADD YOUR WI-FI CREDENTIALS
Select your Wi-Fi network name and enter
your network password. Press "Save". Once
your credentials are successfully entered,
reconnect to your normal Wi-Fi.
4 SET UP YOUR MY ACURITE ACCOUNT
Download the My AcuRite mobile app or visit
www.myacurite.com to complete setup.
www.acurite.com