Page 1
06019RM Package Contents 1. Display unit with tabletop stand 2. Power adapter 3. Instruction Manual This product requires an AcuRite 3-in-1 Weather Sensor (model 06008RM; sold separately) to be operational. IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE...
Page 3
DISPLAY UNIT 19. SET Button 1. Current Outdoor Temperature For setup preferences. Arrow icon indicates direction 20. – Button temperature is trending. For setup preferences. 2. Sensor Low Battery Indicator 21. SELECT Button 3. Average Wind Speed Press to change the Weather Select Average of all speeds over last (#23) category being displayed.
Display Unit Setup Set the A-B-C Switch Install or Replace Batteries Locate the A-B-C switch inside the 1. Remove the battery battery compartment. Set the A-B-C compartment cover. switch to A, B or C. You must select 2. Insert 6 x AA alkaline batteries the same letter choices for both the into the battery compartment, display unit and the sensor in order...
Set the Time, Date & Units Press the “SET” button, located on the front of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ + “ or “...
OPERATION Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents.
Multi-Variable History Chart The multi-variable history chart lets you monitor the change in conditions over the past 12 hour time period (-12, -6, -3, -2, -1, 0). The chart automatically toggles between barometric pressure, outdoor temperature and outdoor humidity readings. Wind Speed The Wind Speed area of the display features the CURRENT speed, as well as the LOW, AVERAGE and PEAK wind speeds.
Page 8
REPLAY Historical Data This weather station stores historical data that can be viewed in Replay Mode. Data is recorded for the past 48 hours in 30 minute intervals (on the hour and half hour). Historical data is shown with a time and date stamp. Press the “REPLAY”...
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Calibration The indoor / outdoor temperature and humidity readings, wind speed interval, and barometric pressure can be calibrated on the display unit to improve accuracy.
If your AcuRite product does not operate properly, visit www.AcuRite.com or call (877) 221-1252 for assistance. For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.
Customer Support AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.