Picture (In Video Mode) - Dell 1610HD User Manual

PICTURE (in Video Mode)

Using the Picture menu, you can adjust the display settings of your projector. The
Picture menu provides the following options:
V —Allows you to optimize the display image: Presentation, Bright,
IDEO MODE
Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings).If you adjust the settings for Brightness, Contrast,
Saturation, Sharpness, Tint, and Advanced the projector automatically switches
to Custom.
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced the projector automatically switches to Custom.
B —Use
RIGHTNESS
C —Use
ONTRAST
S —Allows you to adjust the video source from black and white to fully
ATURATION
saturated color. Press
increase the amount of color in the image.
S —Press
HARPNESS
sharpness.
T —Press to increase the amount of green in the image and
INT
the amount of red in the image (available for NTSC only).
A —Press
DVANCED
control to activate Picture Advance Menu. See "PICTURE ADVANCED" below.
NOTE:
Saturation, Sharpness, and Tint are only available when input source is
from Composite or S-Video.
34 Using Your Projector
to
and adjust the brightness of the image.
and to adjust the display contrast.
to decrease the amount of color in the image and
to decrease the sharpness and
on the control panel or press Enter button on the remote
increase the
to
to increase
to