Input Select - Dell 1610HD User Manual

INPUT SELECT

The Input Select menu allows you to select your projector's input source.
VGA-A—Press
to detect VGA-A signal.
VGA-B—Press
to detect VGA-B signal.
S-V —Press
IDEO
control to detect S-Video signal.
C V —Press
OMPOSITE IDEO
remote control to detect Composite Video signal.
HDMI—Press on the control panel or press Enter button on the remote control
to detect HDMI signal.
A —Press
DVANCED
control to activate Input Select Advanced menu.
INPUT SELECT ADVANCED
The Input Select Advanced menu allows you to enable or disable input sources.
VGA-A—Use
32 Using Your Projector
on the control panel or press Enter button on the remote control
on the control panel or press Enter button on the remote control
on the control panel or press Enter button on the remote
on the control panel or press Enter button on the
on the control panel or press Enter button on the remote
and to enable or disable VGA-A input.
A S —Select Off (the
UTO OURCE
default) to lock the current
input signal. If you press the
Source button when the Auto
Source mode is set to Off, you
can manually select the input
signal. Select On to auto detect
the available input signals. If
you press the Source button
when the projector is on, it
automatically finds the next
available input signal.