NOTE:
Closed caption option is available for NTSC only.
T
P
—
Test Pattern is used to test focus and resolution.
EST
ATTERN
You can enable or disable the Test Pattern by selecting Off, 1 or 2. You can also
invoke the Test Pattern 1 by pressing and holding down
control panel simultaneously for 2 seconds. You can also invoke the test pattern 2
by pressing and holding down
simultaneously for 2 seconds.
F
R
—
ACTORY
ESET
on the remote control to reset all settings to its factory default, the warning
message below appears.
Reset items include both computer sources and video source settings.
and
Test Pattern 1:
Test Pattern 2:
Select and press
buttons on the control panel
on the control panel or press Enter button
Using Your Projector
and
buttons on the
47