Advertisement
1.2 To close the lever, after inserting the
FPC to the full depth of the connector,
turn down the lever by pressing
the entire lever or both sides of
the lever with the ball of finger
* When it is a large number of pins,
please handle with the both hands
* Do not open/close the lever without
an FPC inserted; otherwise, the terminals
may be deformed, and the FPC insertion
force may increase.
* Do not apply an excessive load to the
lever in a direction perpendicular to the
lever rotation axis or in the lever opening
direction; otherwise, the terminals may be
deformed, and the lever may be removed.
* Do not apply a load to the lever
unevenly, such as to an edge only,
when closing the lever of
large number of pins; otherwise,
the lever may be deformed
* Do not close the lever forcefully with
something sharp tool, otherwise,
the lever may be deformed.
* When closing a lever and/or after closing a lever,
please prevent an excessive load from
being applied in the arrow directions
shown on the figure to the right.
An excessive load could result
it terminal deformation, or a broken lever.
Panasonic Corporation
industrial.panasonic.com/ac/e/
1.2 How to close the lever
Precautions
Guide for Getting FPC connector Y5B and Y5BW
.
©
Panasonic Corporation 2015
- 8 -
Both hands when
having large
number of pins
ACCTF15E-3
201507
Advertisement
