AudioCodes Mediant 500Li Quick Setup Manual page 8

Analog voip gateway

Hide thumbs Also See for Mediant 500Li:

Table of Contents

Configuring WAN Interface

This section describes how to configure the WAN interface, which uses Gigabit Ethernet.

Before configuring the WAN interface, make sure that you have all the required information from your Internet

service provider.

Connect the WAN port to the WAN network. For information on cabling the WAN port, refer to the

Hardware Installation Manual.

Open the WAN Interface page (Setup menu > IP NETWORK tab > CORE ENTITIES folder > WAN

Interface).

Configure the following:

WAN settings (Static or DHCP Client - default is DHCP Client)



DNS settings (Static or Auto - default is Auto)



8 |

P a g e

Table of Contents