Setting The Sleep Timer - Danby DAC12344DE Owner's Instructions Manual

Setting the Sleep Timer

Remote Control
Control Panel
14
E-
The Sleep Timer can be used when you are cooling your room to switch
the air conditioner off automatically after 8 hours.
If you wish to switch the unit off at a specific time, refer to page 13.
1
Make sure that you have selected the Cool mode.
2
Press the button on the remote control
or
Press the button on the unit.
Sleep
Result: Each time you press a button, the unit beeps.
The "
The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustration below.
Cooling When the temperature has
been increased by 1 C
(after 1 hour), it is maintained
for 7 hours.
To Cancel the Sleep Timer
To cancel the timer, press:
Sleep on the remote control.
or
Sleep on the unit.
Result: The unit beeps.
The SLEEP indicator is no longer displayed.
The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start up
in the Energy Saving mode.
" will be displayed.