Selecting Energy Saving Mode - Danby DAC12344DE Owner's Instructions Manual

Selecting Energy Saving Mode

If you wish to save energy when using your air conditioner,
select the energy saving mode.
1
To select the energy saving mode, press the
control or button on the unit one or more times until the Energy
E.Saver
Saver indicator lights up.
Result: The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in Dry mode, do not press
the button. You cannot use the Dry mode in the energy saving
E.Saver
mode.
2
To stop the energy saving mode, press the
control or button on the unit again.
E.Saver
Result: The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
button on the remote
E.Saver
button on the remote
E.Saver
Remote Control Control Panel
15
E-