Setting The Sleep Timer - Danby DAC6304DE Owner's Instructions Manual

Setting the Sleep Timer
Remote Control Control Panel
The Sleep 77mer can be used when you are cooling your room to switch
the air conditioner off automatically after 8 hours.
If you wish to switch the unit off at a specific time, refer to page 13.
1 Make sure that you have selected the Cool mode.
Press the _ button on the remote control
or
Press the _ button on the unit.
Result:
• , Each time you press a button, the unit beeps.
• ' The "8 " will be displayed.
'_ The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustration below.
Cooling
When the temperature has
been increased by 1°C
(after 1 hour), it is maintained
for 7 hours.
=
° _I
Set
TEMP. I lhr 8hr
Start Step
time time
Cancel the Sleep Timer
@
To cancel the timer, press:
Sleep on the remote control.
or
• . Sleep on the unit.
Result: _' The unit beeps.
• ' The SLEEP indicator is no longer displayed.
• " The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start up
in the Energy Saving mode.