Setting The Auto-Off Timer - Danby DPAC10071 Owner's Manual

Setting the AUTO-ON TIMER (cont'd)
4) All of the settings are now registered.
5) To set the AUTO-ON timer, the unit must be
turned
"off"
(non-operational).
6) Press the
TIMER-ON
key pad (Fig K) to initiate
the
AUTO-ON
time sequence. The "TIMER-ON"
icon (Fig L) will appear in the display window and
the minute digits start to flash. Press either Ls. or'c7
TEMP/TIME keys (Fig M) to select the AUTO-ON
"minutes". Press the TIMER-ON key pad again and
the "hour" digits start to flash. Press the Lor
V
TEMP/TIME ADJ key pad to select the AUTO- ON
"hour" start time. Press the TIMER-ON key pad
again and the display will stipulate, CLOCK / ON I
and the set AUTO-ON time. Press the clock buttons
(TIME-ON / TIMER-OFF) simultaneously to revert
back to the current time of day clock setting. -The
unit will start automatically at the specified
AUTO-
ON set time. To cancel or override the AUTO-ON
program, simply turn on the unit anytime prior to the
AUTO-ON
time is scheduled to operate.You can
varify the
AUTO-ON
time selected anytime (prior to
the program starting) by pressing the TIMER-ON
key pad. The time you selected will appear in the
display.
1) To set the AUTO-OFF timer, the unit must be
(operational) turned on. (I/O switch)
2) Press the TIMER-OFF key pad (Fig N) to initiate
the
AUTO-OFF
time sequence. TIMER-OFF will
appear in the display window (Fig 0) and the
"minute" digits start to flash .Press theZ or
V
key pad to select the
AUTO-OFF
"minute" time.
Press the TIMER-OFF key pad again and the
"hour" digits start to flash. Press the
or
'V
TEMP/TIME ADJ key pad (Fig M) to select the
AUTO-OFF "hour" stop time. Press the TIM ER
OFF key pad again to the set AUTO-OFF time.
Press the clock buttons (TIMER-ON / TIM ER
OFF) simultaneously to revert back to the current
time of day clock setting. The unit will stop
automatically at the specified AUTO-OFF time. To
cancel or override the
AUTO-OFF
program,
simply turn off the unit anytime prior to the
AUTO-OFF time is scheduled to operate.
You can varify the AUTO-OFF time selected anytime
(prior to program ending) by pressing the TIMER-OFF key
pad. The time you selected will appear in the display.
Setting the AUTO-OFF TIMER
Before setting the AUTO-OFF
timer,
the time of
day clock must be set/operational.
15