Airing Your Room - Danby DAC12344DE Owner's Instructions Manual

Airing Your Room

If you want to provide air circulation without cooling, you can use
the Fan mode.
1
If necessary, press the
Result: The air conditioner starts up in the Cool mode.
The unit beeps twice.
2
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
Press the button on the remote control
or
Press the button on the unit one or more times until the fan speed
Mode
Cool/Dry/Fan
(F1, F2 or F3) is displayed.
Result: The unit beeps each time you press the
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature
cannot be set or displayed.
3
To set the fan speed:
Press the ,
or
Press the button on the unit one or more times until the
Fan!Speed
desired fan speed(F1, F2 or F3) is displayed.
4
To control the direction of the air flow, refer to page 11.
(On/Off) button.
or button on the remote control as desired.
Remote Control
/ button.
Mode
Cool/Dry/Fan
Control Panel
9
E-