Replacing Fuse - ProFitter KFA50PF Operating Instructions & Parts Manual

NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
ProFitter Operating Instructions and Parts Manual
TM
ProFitter
Portable Oil-Fired Heaters
Maintenance (Continued)

REPLACING FUSE

NOTE: The heater is fuse protected. If
your heater fails to ignite, DO NOT
RETURN YOUR HEATER TO THE STORE.
Please follow the simple instructions
below to inspect and change the fuse.
SHOCK HAZARD. To
WARNING
prevent personal
injury, unplug the power cord before
replacing fuse.
- Unplug heater.
- Remove side cover screws using
medium Phillips screwdriver.
- Disconnect switch wires from power
switch (KFA75PF, KFA125PF,
KFA170PF, KFA210PF Models Only).
- Remove fuse from fuse holder (See
Figure 25).
- Replace fuse.
FIRE HAZARD. To
WARNING
avoid fire, Do not
substitute with a higher or lower
current rating.
- Replace switch wires to power switch
(KFA75PF, KFA125PF, KFA170PF,
KFA210PF Models Only).
- Replace side cover.
NOTE: Specified fuse rating: AC 125/8A
For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST www.ghpgroupinc.com
TM
Screw
Side Cover
Power Switch
Figure 25 – Replacing Fuse
Switch Wire
12
KFA50PF, KFA75PF, KFA125PF,
KFA170PF and KFA210PF
Fuse Holder
Fuse
Models: KFA75PF, KFA125PF,
KFA170PF, KFA210PF
Fuse
Fuse Holder
Model KFA50PF