To remove the display (1), pull the display (1) towards you ❶ until you are
able to lift off the display (1) ❷.
A retaining strap can be secured to the bridge (10).
Note: The eBike system will switch off if you are riding at under 3 km/h and
remove the on-board computer from its holder. This does not apply to
eBikes with assistance up to 45 km/h.
Inserting the Removal Blocker (see figure B)
B
(5)
Note: Depending on the design/mounting of the display mount, it may not
be possible to insert the removal blocker. The display must be mounted.
Insert the removal blocker (3) into the adapter tray (5) from below until you
hear the removal blocker (3) click into place.
Bosch eBike Systems
English – 11
0 275 007 3BKen | (20.12.2021)
(8)
(9)
(3)