Adjusting The Assistance Levels - Bosch Kiox 300 Original Operating Instructions

English – 24

Adjusting the Assistance Levels

The assistance levels can be adjusted within certain limits. This gives you the
option of adjusting your eBike to your personal requirements.
It is not possible to create a completely new mode. You can only adjust the
modes that have been enabled by the manufacturer or dealer on your sys-
tem. This may be fewer than four modes.
Due to technical limitations, you cannot adjust the eMTB and TOUR+
modes. In addition, restrictions in your country may mean that it is not pos-
sible to adjust a particular mode.
The following parameters are available for making adjustments:
– Assistance in relation to the base value of the mode (within the legal re-
quirements)
– Drive response
– Top limit speed (within the legal requirements)
– Maximum torque (within the limits of the drive)
The parameters are dependent on each other and influence each other. For
example, it is not fundamentally possible to simultaneously set a low torque
value and high assistance.
Note: Please ensure that your modified mode retains the position, name and
colour on all on-board computers and controls.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)