Inserting The Locking Plate (See Figure B) - Bosch Kiox 300 Original Operating Instructions

To remove the display (1), pull the display (1) towards you ❶ until you are
able to lift off the display (1) ❷.
A retaining strap can be secured to the bridge (10).
Note: The eBike system switches off if you are traveling slower than 3 km/h
and take the on-board computer out of the holder. This does not apply to
eBikes with a support up to 45 km/h.
Inserting the Locking Plate (see figure B)
B
(5)
Note: Depending on the design/installation of the display mount, it may be
the case that the removal blocker cannot be used. The display must be in-
stalled here.
Insert the locking plate (3) into the adapter shell (5) from below until you
hear the locking plate (3) click into place.
Bosch eBike Systems
English – 16
0 275 U07 3en | (01.02.2022)
(8)
(9)
(3)