Dacor OB36 Planning Manual page 18

Optional Side Shelf Installation
1. Install the front mounting bracket for the right side
shelf. Use two (2) of the provided button head fasten-
ers and two (2) lock washers. Tighten into place using
a 5/32" Allen wrench.
Bracket
Installation Instructions
Lock
washer
Button head
fastener
2. Slide the slot on the inside of the shelf over the pin on
the mounting bracket.
Pin
3. While holding the shelf in place, insert the pin on the
back mounting bracket into the slot on the back side of
the shelf.
4. While holding the shelf and back mounting bracket in
place, attach the back mounting bracket using two (2)
of the provided button head fasteners and two (2) lock
washers.
5. Repeat steps 1 through 4 for the other shelf.
13