Safety - Hernon Ultracure 7 Manual

Hernon Manufacturing ®

Safety

Please, read all safety specifications before performing any procedures such as checking products on
delivery, storage and transportation, installation, wiring, operation and inspection, or disposal. Be sure
to observe these precautions thoroughly.

All operators and maintenance personnel are required to read this safety
instruction list before attempting to operate, adjust or repair.

Never operate with electrical enclosure open.

Do not operate this or any other machine without all protective guards and
covers in place.

Do not operate this device before reading and understanding the operator's
procedures in this manual.

Any electrical servicing or adjustments requiring access to electrical enclosures on
the machine should be performed only by qualified personnel with electrical
power disconnected and locked out.

Safety glasses must be worn by the operator and any one in the area of
operation. W/ #5 Green Shade Goggles.

Hands should never be placed near moving or illuminated areas.

Disconnect and lock out electrical power, hydraulic power, air pressure and water
before performing machine or tooling adjustment and or maintenance.

Keep area around device/s clear of all debris, water, oil, etc.

Use only genuine OEM Hernon replacement parts when servicing this machine
tool. Ignoring this warning could cause unintended operation and possible injury.
WARNING: DANGEROUS ULTRAVIOLET EMMISSION
Recommended #5 Green shade goggles for eye protection
This equipment is designed to be used properly, set up with components correctly connected, and
operated in accordance with relevant instructions. Its design was developed to maximize operator
safety.
GENERAL WARNINGS
107-028 Ultracure 7
5 | P a g e